This is the General company blog where you can find just General information about what we are doing
The past month or so has been an intense and difficult time for the business, When we started the restoration it was much easier however things change. Also when we were starting out on YouTube it was something that was…
This is a question we get asked so much regarding what to expect in an interview to become a bus driver. So we decided we will answer it here. Once you got our interview date you might have a lot…
For once in this project so far we are at a stage where bits are going back on this bus, Last week Jordan and Shaun took the oil sump to R.brigs (01254 230777) They do all welding and was Brilliant…
Hi Everyone, After what seems a month has passed we have finally got back to work on the project. Week 24 which if we was actually counting weeks we could easy be up in the 40s now however keeping it…
Welcome to 2025 and week 12 of 104 of the restoration. Well where to start on this one, We have returned into 2025 to the bus and wow after another 2 week break over the Christmas period, It was like…
Week 11 was a good week, Although in the grand scheme of things not much physically visible was achieved quite a bit was found out and a little bit of progress was made inside the vehicle. So lets start. We…
Welcome to this post for week 10. This week was a frustrating one as we continued to grapple with the starting issues of our Cummins 6BT engine. Despite replacing a fuel line, the engine remained difficult to start and struggled…
Hi Everyone, In week 9 Jordan took the now fully charged batteries back to the bus and with a small list of jobs that he could do in the bag. This week he decided to tackle the engine again as…
Welcome back everyone to this blog, Some weeks has passed now since we last posted about the progress with the restoration. There has been a gap of around 3 weeks in the weeks, This has been a tricky time for…
This week Jordan did some prep work by cutting all the screws that was left over from the previous weeks floor removal leaving the bars a little smoother than they was ready for a grinding and making back into shiny…